2016 new design ABS/SS/GLASS rgb 35w 12v par56 led lamps for swimming pool

2016 new design ABS/SS/GLASS rgb 35w 12v par56 led lamps for swimming pool

LED swimming pool light Application: 

Widely used in swimming pool , garden pond , man-made lake and fountain, etc.

Cautions:

1.Work with AC12V,otherwisw the  pool light will be possbily damaged.

2.This light should be installed not deeper than 50cm underwater.

3.The power wire of the led pool lights shall be joined with other power wire out of the water,waterproof treatment should be done if the joint is in the water,otherwise there is risk for water intrusion.

4.The pool light should be in the water,otherwise the pool light will possibly damaged or cause disfunction.

If the user is not available to test it in the pool,then please shut off the light every 3 minutes to be cold for the new test.

Features of par56 led pool light

1.The led pool light uses 3 dichroic leds in red, green and blue as a light source, which when combined permit obtaining 7 different colours.

2. It can be used in new-built pools and adapted to existing pools without the need of changing the existing niche.

3.you can replace the PAR56 halgon light with our LED pool light directly by install your recessed housing.

4. No mercury and lead pollution, no UV and IR Radiation.

5. Low heat, low degradation, lifespan over 30000Hours.

6. Energy Saving, Environment Friendly.

7. Easy installation, maintenance free.

8. led swimming pool light body with good sealing structure, waterproof, corrosion prevention.

9. Designed low voltage ,safe, and reliable.

10. Low comsumption and colorful, with fancy light effect.

contact:Lucy Zhao

skype:shanlonglucy

tel/wechat: +86 13924874151